Pawtuxet industrial Park • 100 Bellows Street, Building 13 • Warwick, RI 02888 401.941.7451 • 401.941.8345 fax

updated 10-10-09 Final--See you at the Auction!
next update: 10-16-09

please scroll ALL the way down for complete listing

Preliminary Listing of Auction Items at R.E. Chapman Auction
October 14, 2009 11:00 am at The Manor Fuction Facility
October 15, 2009 8:30 AM on the premises 30 North Main Street
Inspection October 12 & 13, 2009 from 8:30 AM to 5 PM or by appointment
October 14 from 8:30 AM to 10:15 AM

Equipment Specifications will be updated frequently
please contact auctioneer for additional information.
Note: Although information is beleived to be obtained from sources that are
reliable, auctioneer makes no warranty or guarranty of information presented.
It is for that reason that all bidders should attend the inspection.

Tel (USA) 1+401.941.7451
or email auctioneer
Additional Info for Drilling Auction

Equipment listed by Category, please scroll down

++++this is a partial listing only.......see Bidspotter.com for complete lot listing
of Day 1 October 14 auction....October 15, 2009 listing posted at auction home page
Rotary, Cable Tool, Subsurface Drill Rigs
All to be sold on October 14, 2009
Dual Rotary:


Lot # 121: 2003 Foremost Heavy Duty DR 24 Drill Rig/2003 Kenworth T800,
Model DR-12/26P-80/24HD-1250; S/N 032283 ; Foremost DR 24HDTruck Mounted Dual Rotary Drill Rig 80,000 Hold Back; 30,000 Pulldown; 86 RPM Rotary Drill Head; Bean Pump, Ingersoll Rand 1250/350 Compressor,
Rig mounted on 2003 Kenworth Truck Vin# 1NKDLBEX93J385081, CAT C-16-600 engine;
Eaton/Fuller 8 Speed Transmission, Rear Ratio 5:29, Rig set up to accept Reverse Circulation Tooling
FULL SPECIFICATIONS OF DR24 AS BUILT: TIF File Click HERE....PDF File Click HERE

Lot # 122: 1995 Foremost Dual Rotary Drill Model DR12/26-40/24-900, s/n 951869; Mounted on 2000 Kenworth T800,
Truck VIN 1NKDLB0X6YJ866873, Drill Rig: 42,500 lbs holdback, Sullair Compressor DC 900 cfm/350 psi s/n 004-DC3408
Water/Foam Injection, Hydraulic Breakout, Truck Engine Cummins C-12 396 HP
Diesel Engine, Fuller Eaton 8 speed Transmission, Rig set up to accept Reverse Circulation Tooling

Lot # 120: Reverse Circulation Tooling, including mud pump, swivels, Reversing Subs and all items to complete tooling set for Rev/Circ Drilling consisting of Mission 4x3x3 mud pump new 06/03 s/n M57310, Air Swivel and Discharge Swivel support forks, 4 1/2" 90 degree discharge pipe, 7" cone seal for diverter head, wrenches for holdback and breakout.

lot # 121: Also to be sold separately as 1 lot: (8) 20', (2) 10', (2) 5' 7" CSR Drill Rod for Reverse Circ, 7" OD 4" ID CSR Thread and (13) couplings

Air Rotary:
Just Added: 2002 Schramm T450W on 315L Cat Crawler; 1998 Schramm T450W on 1998 International
Withdrawn: 1996 & 1985 IR T4W


Lot # 123: 1985 SpeedStar 30K-1 s/n 101184/2003 Kenworth Truck Model T800, VIN # INKDLBOX63J897176,
Chassis # 897176, 475HP CAT C-15-475 EngineS/N 2F14052, Fuller 8 Speed Transmission,
Sullair 900/300 Air Compressor, S/N 051051418; Gardner Denver Mud Pump; Drill Rig, S/N 101184,
Single Front Jack, Twin Rear Jack

Lot # 124: CP 7000 Rotary Drill Rig s/n 97309 mounted on 1987 Paystar 5000 10 Wheel Truck Tractor
Model F-5070, VIN # 2HTTGJMT7HC001642, Fuller Roadranger 8 Speed Transmission,
Jake Brake, Cummins 8 Cylinder Turbo Diesel Engine # 1138402 Model NFC - 300 855 CID,
Gardner Denver 5 x 6 Mud Pump; Bean 2L Pump; CAT 900 CFM Compressor,
CAT Deck Engine, Hydraulic Breakout, Hydraulic Mast and Jacks,

Lot # 125: 1994 Schramm T450W ALL WHEEL DRIVE, Ford FT900 All Wheel Drive, VIN 1DFY190E55VA00962 8.3 L CI Cummins, Fuller RT 13 Speed, 8.3 Lt 505 CI Cummins truck engine 235 HP @ 2700 rpm, Rockwell RT40-145 4.88 Rears (note: front driveshaft & box removed for highway travel but will be sold with the rig), DRILL: Schramm T450W, 8V71 Engine replaced w/8V92 3885 hrs, new Fuel Injection, GHH compressor 825/350, s/n J102-6610

Lot # 126: 2002 IR T4W 1070/350, s/n 6696, 70,000# Pullback, DHD oiler,18GPM bean pump, 7/4 Rod Carousel,
Cummins QSX15 600 HP Deck Engine (less than 200 hrs) CAT C10 in Crane Carrier,
Recently Serviced, Deep Hole Package



Lot # 127: 2001 IR T4W 1070/350, s/n 6617 QSK 19 Deck Engine, 50,000# Pullback, DHD oiler, water pump,
7/4 Rod Carousel Spur Head Gear, C10 in Crane Carrier, 29,000 miles

Lot 128A: 1998 Schramm T450W on 1998 International F4900 VIN 1HTSHAARWH511751; 1998 Schramm T450W Rotary Drill s/n J102-B127, Sullair 835/350 Air, Detroit 8V92TA, Dual 29ci Rotary Heads, Floating Sub, Adjustable Torque Limiter,

Lot 126A: 2002 Schramm T450W on CAT 315L Undercarraige/Crawler; Sullair 900/350 Air, Cat 3406 Diesel, 12 Gal cat. Water Injection Pump, Dual Motor Top Head Drive, Hammer Holder, Foam Injection, Remote Tram Controls, Slideing Top Head, Angle Drilling Capabilities, Adjustable Rotation Limiter, Rig handles 4 1/2" x 20" Rod (not included) 6340 hrs

0
Lot # 129:--- WITHDRAWN---1985 IR T4W 900/350, s/n13102 37,500# Pullback, oiler, bean pump, rod included

Lot # 128:---WITHDRAWN--- 1996 IR T4W s/n 6216-PICTURES COMING KTA 19 on deck, 2K hrs since rebuild, Cummins L10 in
Crane Carrier w/0 Miles since rebuild,

Lot # 141: 1974 CP650 on Ford 800 750/350 air Twin Deck Engines, Ford 534 Gas Engine up front,
200' Rod, includes tools

Lot # 130: 1976 IR T3 750/250, VT903 Cummins Turbo, 20,000# holdback, Oiler (new), Hydraulic cooler, Auto Feed,
250 psi Hydraulic Rotation, 4" 0D rods w/3 1/2: API (425' rod), breakout wrench, 6" hammer, new deck engine

Truck & Trailer Mounted Cable Tool Rigs &
Environmental/Subsurface Investigation Drills
also: Clamps, Fishing & Drill Jars, Pipe Spears, Fishing Tools

Lot # 111: Bucyrus Erie 28L Cable Tool/1995 Ford L9000 VIN 1FDZU90USVA78720
Cummins CN14 Turbo, Drill: 130 GM/Detriot Deck engine, F&R Transmission, Rig S/N 46592
Hydraulic Jacks, Toolhouse


Lot # 140: 42T Cable Tool Drill Rig, Bucyrus Erie Model 42-T, Serial # NVWC142, Trailer Mounted, Cummins 235

Lot # 142: 29-1 , on site at Chapman, needs work, trailer mounted, rig intact with all components

Lot # 110: BE60L/1996 Mack; BE 60L Cable Tool Rig, 63 Bucyrus - Erie 60-L, Serial # 3-1024-1,
Mounted on 1996 Mack, VIN 1M2B22C9TM003893, Toolhouse, Hydraulic Jacks, GMC 371 Diesel Deck Engine, Stems & Wrenches

Lot # 114: Bucyrus Erie Cable Tool Rig Model 24-3, Mounted on 1974 Autocar, VIN# X016PF1074177
GMC 271 4 Cylinder Diesel Deck Engine with Transmission, S/N 71045, Toolhouse, Drill Stems & Wrenches

Lot 118: 1990 Mobile B61HDX on 1990 Ford F800 VIN 1FDK84A71VA31212, Ford 7.8 Lt Diesel Truck Engine 210 HP, Cummins 4BT Diesel Deck Engine, 3L8 pump, safe-t-driver, 8500 main hoist, 3200 auxillary, water tank, 29' mast high speed head, Mobile B61 HDX Drill s/n 90022

Lot 118A: 1992 Mobile B61HDX s/n 91020 on Ford F800 VIN 1FDXK8YA9MVAL16017, Ford 7.8 Lt Diesel egnine, 210 hp @ 2500 rpm; Mobile B61HDX w/Cummins 4BT 3.9 Lt Diesel Deck Engine, 1282 hrs on rig, 3L8 pump, 8500 main hoist, 3200 auxillary, water tank, 29' mast high speed head, Mobile B61HDX Drill s/n 91020

Alten Loomis -Super Clipper, Drill Rig only, no truck,

Tracked, Unmounted Subsurface & Rotary Table Drive Drills:

Lot 112 BE20W-1 1960 BE20w-1 s/n 117647 w/4Cyl Continental Gas Engine on 1973 Bobardier w/4Cyl Ford Gas Engine
Lot 113 BE20W-2 1961 BE20w-2 s/n 1120HA203JT12003 W/Continental 4 Cyl Gas Engine on 1970 Bombardier 4 cyl Ford

Lots 134 & 135: (2) REC Portable Table Drive Rotary Drills, propane powered portable table drive rotary drill w/4 cylinder
Ford propane engines, 4 speed forward 1 speed reverse transmission, rotary drive table, kelly bar, breakout wrench,
elevator/rail mounted top head drive, Swivel, for use in close quarters and interior environments

Lot 136: IR Crawler Type Roatry Drill, Air/Hydraulic s/n DID

Lot 131: 2002 Simco Earthprobe 200 EP200 s/n 021866 834 hours, Kohler 25HP OHV Model CH25S Engine, Rotary Head, SK85 Hammer

Lot 132: 1995 Simco Earthprobe 200 s/n 951486 lot # 133.300, 1500 hrs, B/S 18HP engine replaced has 225 hrs, rotary head

Lot 132A: 2002 Geo-Probe 6601DT 2,100 hrs, Kubota Engine 2.0 LT, Model V2003-TE s/n 01Q0374, New Tracks &GH62 Hammer w/75 hrs

Breakout Machine:

Lot 46 (8 HP) Lot 47 (5 HP) (1 of 2) Scorpion Hydraulic Breakout Machines, Honda 8 HP Motor, Honda 5 HP Motor

Crane Trucks, Picker/Boom Trucks, Smeal Rigs & Pump Pullers:
October 14, 2009 auction session

Lot 84: 2001 Kenworth T800 / 600D Crane Truck, VIN # 1NKDLV0XX2J890595, 58,000 GVW;
4:63 Rear Eaton/Fuller 8 Speed Transmission S/N RT10149OBLL; Chassis. Number 890595;
Engine Cummins. C-12 395 HP National/Grove 600D s/n 33993, Hydraulic Extending Crane; 85 Feet Boom Extension,
36,000 Pound Capacity Dual Side Controls; Outriggers

Lot 87-88: (2) 1986 International F9370, VIN # 2HTFBJST4GCA10086, Fuller 8 Speed, Transmission,
PTO Cummins 400 HP Factory Reconditioned Engine; Model PP400BC3; New 1984 S/N 60515842
Engine: Prentice 8000 Picker; 30' Bed;

Lot 85: 1995 International , VIN # 1HTGLAHT9SH634134, Prentice Model T5-37, Outriggers,
30' Picker, S/N 720089

Lot 86: 1987 International F 9370 6 x 4 Truck Tractor, VIN # 2HSFBG2T4HC00486 Fuller 8 Speed Transmission;
Cummins NTC 315 Engine; 315 HP with Prentice Model 992113 8000# Picker, S/N 120-730-489; 21' Steel Bed

Lot 133: 1996 Kyle Pump Puller/1996 Ford F-350 Power Stroke, 5,000# capacity, sand line

Lot 133A: 1984 5T Smeal Rig/Chevy 3500 Diesel less than 20K Miles, Gargaged.


Flatbed, Water & Vacuum Trucks: October 14, 2009 session

1 of 6 Road Trucks.......Lot's 155-160
1986 International Road Truck, VIN # 1HTLDUXN2GHA22237

1981 International 6 Wheel Road Truck, VIN # 2HTAA1856BCA17989 18' Flat Bed,
Steel Floor, Air Brakes, 2 Speed Split Axle, 5.29 Rear, DT-466. 180 HP Engine, 5 Speed Transmission.

1987 International S-1900 6 Wheel Road Truck, VIN # 1HTLDTVN1HH522479, 21 Bed,
Warn Series 12 Electric Winch, Side Boxes

1986 International 22' Long Bed Truck VIN 2HTFBJST6GCA10090 with Prentice 99213 Picker

1983 International 6 Wheel Road Truck, VIN # 1HTAA1955DHA16939, 18' Bed 5 Speed Transmission,
250 Gallon Steel Water Tank, Screen Rack


1997 International 4900 22' Flat Bed Truck, VIN # 1HTSDAAN4VH470864 Cummins DT466 Engine, Fuller Transmission.

1987 International 22' Bed Truck, VIN 1HTLDTVN8HH522480

1981 International Model 1954, VIN # 2HTAA1850BCA17972, DT-466 180 HP Engine. T764, 5 Speed Transmission; 5:29-7:21 Rear.

1987 International S-1907; VIN # 1HTLDUXN1HHA12445, 21 Steel Flat Bed, 8 Speed. Transmission, DT-466 Engine.

Vacuum & Water Trucks:

Lot 139: 1988 VacMaster Truck Vac-n-Dig Model VND s/n 280110694, John Deere, 780 cfm blower (less than 300 hrs) 100 cfm@150
psi compressor, 500 Gal tank, mounted on 1988 International VIN 1HTLAZPM7SJ54 Diesel w/auto trans NON CDL 10x22.5 radial tires
VIN 1HTLAZPM7JH549661

Lot 137: 1981 GMC General Rig Tender/Water Truck, DT466, 2000 Gal Amthor tank w/front winch

Lot 138: 1980 International 1800 Rig Tender/Water Truck 1000 Gal tanks,

Lot 138A: 1980 GMC/General Water Truck, 8V92 w/13 speed, 1900 Gal Amthor, 250 Gal Fuel Tank,
front winch, 62,000 lb GVW, 18 F/44R, recently painted
Lot 116: 1998 International w/1998 Flatwater 3200 Gallon Water Tank, 3 Axles, locking rears, 8LL Tansmission,
450 Cummins, 3200 gal auto self loading/unloading, 200+ Gallon Fuel Tank for off road, strobe light, work lights, built in tie downs, work boxes

Pickup & Service Trucks, Dozers & Wheel Loaders October 14, 2009 session
Pickups: Lot #'s 144-154
1996 Ford F250 XL, VIN # 1FTHF25H3TLA12898, 5 Speed Manual Transmission, 5.8 L, Running Lights

1996 Ford F150 XL, VIN# 1FTEF15Y7TLC21042, 5 Speed Transmission

1995 Ford F250 XL, VIN # 1FTHF25H5SNA23534, 5 Speed Transmission

2002 Ford Pickup VIN # 1FTNF20L12EB10992

2000 Ford F250, VIN# 1FTNF20L2YED32711

2006' Ford F250, VIN # 1FTNF21556EC98812

1996 Ford F 250 XL VIN # 1FTHF25HOTLA36382, 5 Speed Transmission

2000 Ford F250, VIN # 1FTNF2IL2YED40936

2005' Ford Pickup, 1FTNF205X5ED06001

2000 Ford 250 XL Super Duty VIN # 1FTNF20LOYED32710, Triton V8, 5 Speed Transmission,

2005 Ford Pickup, VIN # 1FTNF21535ED06002

1999 Ford 250 XL Super Duty, VIN # 1FTNF20L7XED31830, Triton V8,
5 Speed Transmission.

1997 Ford 350 XL Power Stroke Pick Up, VIN # 3FEKF37F6VMA03497, 225 HP Turbo Diesel V8;
Engine Model A225; Dual Rear Wheels, 14' Truck Body

1996 Ford F150 XL, VIN # 1FTEF15YXTLA08649, 5 Speed Transmission

1994 Ford F250 XL, VIN # 1FTHF25H5RLB57451, 5 Speed Transmission

2002 Ford F550 XL Super Duty, VIN# 1FDAF56F72ED06917, Power Stroke Diesel V8.
Automatic,15' Steel Flat Bed, Steel Fuel Tank with 15 GPM Electric Pump

Chevy Blazer Plow Truck VIN # 1GNEV18K3JF185189 4 Wheel Drive with Fisher 8' Plow.

Lot 162: CAT 930 Articulated Wheel Loader S/N 4K11967; CAT 3304 Engine S/N 7N1522;

Lot 161: John Deere 450C Bulldozer, Serial # 450A196126T

Trailers:

Lot 166: 9' Harvey Tag-a-long Trailer

Lot 164: NETAC 24' Vehicle Trailer - Tandem Axle, Air Brakes, 32,000# GVW, Model TB122040

1988 Gooseneck Trailer


Air Compressors, Welders & Generators October 14, 2009 session

ETQ F40IE 2 Stage Air Compressor 8 CFM at 100 PSI (New)

Ingersoll Rand T30 Horizontal 2 Stage Air Compressor, Model 2545E10 S/N 30T-9-2392,
10 HP Motor, 80 Gallon Reservior


Lot #'s 78-79-80: (3) Ingersol Rand 185 tag-a-long Compressors John Deere 4054 Diesels, New 2000

Lot 83: Ingersoll Rand 825 Air Compressor Model XP-825-W-CU, 825 CFM, Cummins
Model C-10A Diesel Engine

Lot 81: Ingersoll Rand 1300 Air Compressor with Cummins CN14 Smart Start, New 1998, Model HP1300WCU,
s/n 203003UHI720 1897 hrs on meter

Lot 82: Ingersoll Rand 900 Air Compressor, Model XHP-900-W-CAT, 900 CFM,
CAT 3406C Diesel Engine, New 1998, 2414 Hrs on meter

Welders: partial listing only begins at Lot # 89

Lincoln Idealarc 250 Arc Welder S/N AC 530790

(3) Lincoln Trailblaxer 300

(3) Miller XMT 304 Mig Welder with Miller 60 Series Wire Feed.

Hypermax Power Therm 600 Plasma Cutting System S/N PMX600-013438

(4) Lincoln Weldanpower Model 250G9PRO, S/N A1122815

(2) Hobart Champion 16 Welder/Generator,

Generators & Welder/Generators:

Portable 15KW Generator, Lima Alternator 2401480 Volts 800 RAM S/N 3160-2056
Powered by VM Motori Sun 210T 2 Cyclinder Diesel Motor S/N 67A14023

Avco Diesel Motor Model 1052-30, S/N 232157 w/15KVA Generator

ETQ TG1200 Generator ( New)

30 Amp Welder/Generator, Tow Behind

Honda EB 3500X Generator.

Honda EX1000 Generator

(3) ETQ Diesel Powered Portable Generators,

(4) Lincoln Diesel Powered Arc Welder Model Shield Arc SA-250 D3

(2) Lincoln Weldanpower 250 G9 Pro Gas Powered Arc Welder.

(5) Lincoln Weldanpower Welder/Generators.

CAT 75KW Generator , CAT 2114 Diesel Engine, 109 HP, S/N 5JG00619,

Pumps, Hoists & PTO's Octboer 14, 2009 session:
Pumps: partial listing only
Just Added: Thompson IGE-18 Well Point System w/200 PVC Well Points, 600 PVC Header Pipes, & Header Assembly, 100 Plastic Swing Joints, Transport Trailer

VM Motori 2 Cyclinder 4" Trash Pump with Sun 2 Cyclinder Diesel Engine
Model UN2105 S/N 03487 with Jaeger Centrifugal Pump, 4" Trash Pump with VM Motori Sun 2105 S/N 67A190984 2 Cyclinder Diesel Engine with Pioneer Model P4C00FEH Trash Pump with 9.75" Impeller S/N 3151, (5) Wilden M15 Diaphram Pumps, (2) Gardner Denver Oil Pumps, (2) Halkel Fluid Pumps, Mission Nation Oilwell 4 x 3 x3 Mud Pump, S/N MX-9200-90-30, Hitachi 10-30 HP Pumps (most new), Yamaha Pumps, Honda Pumps

PTO's, Holloshaft & Right Angle Drives, Line Shaft Reducers, Drive Heads, Swivels:

Johnson Gear and Manufacturing Line Shaft Reducer, Model HD90, S/N 3594, Ratio 6-5, (5) 75 HP Holloshaft Motor Drives (3) 60 HP Holloshaft Motor Drives, Right Angle Drive Assemblies, 4 Cylinder Engine, Johnson Gear HD75, S/N 33993 90o Reducer, US Motor /Holloshaft Pump Motor 100HP, 70 HP Holloshaft Gear Drive, (3) Ford Powered Power Take Offs 6 Cylinder, (3) Portable Drive Heads and Tables for Kelly Bar, (4) Electric Hoists - 3 Ton, (2) Hydraulic Winches, Rockford Power Take Off with 4 Cylinder Gas Engine and Rockeler PTA5571 Clutch S/N 612329 with Jaeger Reel and 10' Derrick, Sorgel 3 Phase General Purpose Transform 45KVA, 54 Amps, Lot Steel Cable in Spools and Lengths, Hydraulic Operated Reel with Cable

Roller, Claw, Hammer & DTH Drill Bits,
Sand Pumps, Reamers October 14, 2009 session

Bits: partial listing only: Begins at Lot #189
16" x 5' Hammer Drill
(3) 12" x 5' Sandvik/Mission Hammer Drills
(3) 18" x 5' Reamers
(2) 15" Reamers
(150) New/Rebuilt Roller & Button Drill Bits from 5" & up
18' x 8" Button Bit with 18" x 5' Reamer wit 16' x 10" Drill Shaft
5' Six Finger Hydraulic Clamshell Oct 15 Session
3' Six Finger Mechanical Clamshell Oct 15 Session
12' x 36" Six Flute Paddle Drill Oct 15 Session
12' x 48" Six Flute Paddle Drill Oct 15 Session
14' x 56" Six Flute Paddle Drill Oct 15 Session
17' x 29" Four Flute Paddle Drill Oct 15 Session
Drill Rod: 20' x 16", 6", 8" 4.5", 19", 20", various lengths, 1000's of feet
Roller Drill Bits and Drive Shafts for Elevator Work
Bruce Tool 24" Roller Drill Bits (New) (2) Used Bruce Tool
24" Roller Drill Bits, 19" Roller Drill Bit, (2) 18" Roller Drill Bits
24" Roller Drill Bit, 18" Roller Drill Bit, 36" Roller Drill Bit,
24" Roller Drill Bit Lot 8 Roller Drill Bits up to 28" Diameter
Elevator Drills, Cable Tool Drills, Oct 15 Session

Machine Shop & Shop Support October 15, 2009 session

Regall Leblond 22" Swing Long Bed Lathe S/N 4D1236; 12' Bed; Hardened Ways; Tail Stock;
Steady Rest; Compound Saddle with Cross Feed; Taper Attachment; Lead Thread; Forward/Reverse; Fine and Course
Thread & Feed; Servo Motor Control,

Marvel No. 8 Vertical Band Saw, s/n 81979, 12' Comveyor Infeed


Bridgeport Vertical Milling Machine; S/N 106325; "J" Head S/N J106070; 2 HP Drive;
Step Speed Changer; Power Table Feed; X/4 Bridgeport Optical Read Out,

Gates Hose and Coupling Assembly Table; Gates 14" Separating Chop Saw; Gates PC 707 700
Series Crimping Press and Tooling with Hydraulic Pump,

Jersey Dee Floor Mounted Radial Drill

Covel Model 7A 612 Hand Surface Grinder S/N 7A-1438 with 6 x 12 Walker Magnetic Chuck

Gisholt 22" Turret Lathe; 10' x 26" Bed; Tooling Saddle; with Full Power Feeds; Micrometer Stops;
6 Station Turret Saddle with Full Power Feed, Straight Hole Collet; Hydraulic Drive; 4 Jaw Chuck; Coolant;
Machine Tool Piece # 14W-9137A S/N 64685X1; 12" Thru Feed,

Powermatic Floor Drill Model 1200 S/N 65-155; Servo Speed.

150 Ton Hydraulic Arbor Press with Enerpac PE93045 Hydraulic Pump Unit S/N DCO

Cincinnati Bickford 60" Radial Arm Drill S/N 4D378A

Oster 5" Capacity Electric Pipe Threader, S/N 784-NS-28

Machine Shop Acessories: Brown & Sharpe Universal Dividing Head; Lot Hold Downs and Clamps; Lot of Fittings; Elbows; Guages and Air Supply Components; (2) Bench Top Grinders; Lot of Taper Shank Drills and Reamers; Set of Screws; Cap Screws; Number Stamps; Calipers; Verniers; Hand Drills; J16 Saws; Graduated Micrometer Sets to 12"; Taps; Dies; Thread Guages; Height Guages; Mechanics Vises; Machine Vises; Pipe Wrenches; Parts Storage Cabinets; Dumore Tool Post Grinder; Tool Bits; Tool Holders; Hand Tools and much more.

Casing:-partial listing only Oct 15 Session

Stainless Well Screen Approximately 700'
(21) "J" Breakout Tools for Bucyrus Erie Drill Rigs
Stabilizers, Sand Pumps, and more

Casing October 15, 2009 session
1000's Feet of Casing to 30" located at the REC Yard
30" Casing,
24" Casing,
16" Casing,
18" Casing
14" Casing,
10" Casing,
8" Casing,
6" Casing,
Casing from 48" up to 96" located in Pipe Yard

Other Items of Interest: Oct 15 Session
BE60L Transmission, Slings, (40) OxyAcet Torch sets, (7) Portable Compressors, Truck Tool Boxes, Spare Parts (New) for DR's, SpeedStar, Cable Tool Rigs, Masts, Derricks, Pull Down Towers, (30) Welder Leads,
6 1/2 " PVC Pipe Approximately 1800'
16" PVC Pipe Approximately 120'
12" PVC Pipe Approximately 140

AND..............MORE............ PLEASE ATTEND THE INSPECTION!